Scaffolidng-manufacture,factory,supplier from China

 Scaffolding Extension Base Plate is the starting base of the scaffold. 125X125X381/762mm250X250X381/762mmWe have many types of scaffolding jacks, at the same time ,we can supply oem serviece.    

RFH Scaffolding PipeRefers to scaffolding pipes used in construction, commonly made of metal or aluminum.These pipes assist transient buildings for people at heights.1. Function: Scaffolding affords a protected platform for workers, assisting heavy gear and substances whilst making sure safety.2.

The push-pull pillar is a pillar composed of an outer tube, a left and right threaded spindle and an inner threaded nut.The end plates of the push-pull struts at both ends are connected to the bottom plate by bolts and nuts in construction concrete and shutters.    

Wing nut is one kind of accessories of wall formwork systems.It's used together with tie rod.Formwork wing nuts are an important component used in construction, especially in formwork systems. Used to hold form panels together, wing nuts are essential for creating temporary molds and pouring concrete to form walls, floors, columns, and other concrete structures.Wing nuts are used in conjunction with tie rods or threaded rods.

A base collar in construction typically refers to a component used in formwork systems, especially for columns and similar structural elements.Installation and Use1.During the construction process of a concrete column, the base collar is typically installed as follows:2.Preparation: The column reinforcement is set up according to design specifications.3.Formwork Assembly: The base collar is placed at the bottom of the formwork assembly, ensuring it is securely attached and aligned with the column formwork.4.Concrete Pouring: Once the formwork and base collar are in place and checked for alignm

 RFH PIN TransomIt is a ringlock scaffold fitting. Our company can provide a full set of  scaffolding accessories, so that you buy all in one stop. Convenient and easy to worry about.In scaffolding terminologies, a "Pin Transom" refers to a horizontal scaffold member that connects two vertical scaffold poles (standards) together.

Ringlock scaffolding is the most famous sorts of scaffolding structures in the world. As a modular scaffolding system, it is extraordinarily versatile and can be erected from the floor up or suspended. Ringlock scaffolding device can additionally be erected in a stationary or rolling tower configuration, which makes it ideal for secure work at height.

STEEP PROP is engineered and manufactured to meet and exceed any work environments. Various sizes with different loading capacities are offered to match your existing inventories.Easy erection, strong loading capacity      Looking forward to become your long time and trustworthy supplier.

The push-pull prop is a structural element consisting of an outer tube, a left-hand and right-hand threaded spindle, and an internally threaded nut.  At each end of the push-pull struts, the cease plates are connected to the back plate using bolts and nuts during concrete construction and shuttering.    

Adjustable Universal Screw Parapet is an accessory of scaffolding and formwork system. Working on high scaffolding requires edge protection to prevent falling.Any scaffold safety inspection should include checking that the guardrail is correct and in the correct position.    

Scaffolding Steel Palletit's  used to hold products.Size: 1160x650x355mm and other sizes are available.    

Adjustable Steel Formwork Adjustable Steel Formwork is made up of 15 mm thick birch plywood covered with steel frame . It is a complete product system with many types, such as wall formwork, column formwork, angle formwork and so on. One type similar to rasto wall formwork,another type similar to trio formwork. Ancillary products and accessory variety are complete, and product assembly is convenient. It is practical, safe, reliable, cost-saving and applicable to various solutions.

Steel Plate FormworkSteel Plate Formwork is made up of birch plywood covered with steel frame . It is a complete product system with many types, such as wall formwork, column formwork. Ancillary products and accessory variety are complete, and product assembly is convenient. It is practical, safe, reliable, cost-saving and applicable to various solutions. As a result, it provides a set of complete and reliable formwork products for building constructionCertificate:

RFH-Scaffolding Construction Steel Forged SpannerCertificate:   

Rizhao fenghua scaffolding- i beam bar 18"Certificate:    

RFH(Rizhao Fenghua) Steel FormworkThis heavy-duty steel formwork is constructed with 18 mm thick birch plywood encased in a steel frame. It’s a comprehensive system that includes various types, such as wall formwork, column formwork, and angle formwork.With a complete range of ancillary products and accessories, the system is easy to assemble. It’s practical, safe, reliable, cost-effective, and adaptable to a wide range of construction needs. As a result, it provides a comprehensive and dependable formwork solution, particularly for wall and column construction.

Shorping Prop is a predominant section in Formwork project, A entire set of metal prop consists of an internal tube, an outer tube, a prop nut, a Jack plate and a Base plate.it can be adjusted to any size internal its vary      Looking forward to become your long time and trustworthy supplier.

Introduction: Shorping Prop is a main part in Formwork project, A complete set of steel prop consists of an inner tube, an outer tube, a prop nut, a Jack plate and a Base plate. it can be adjusted to any length inside its rangeShoring props are vertical telescopic tubular steel devices used in construction to support ceilings, walls, and trenches during renovation or construction. They are adjustable in height and designed to withstand heavy loads.

 RFH U -Transom CoverHere is the ringlock scaffolding manufacturer, we can provide a full set of scaffold accessories. More professional and assuredThe term "U-transom cover" typically refers to a component used in scaffolding systems.A U-transom is a horizontal scaffold member that connects two vertical scaffold poles (standards).

RFH Jack BaseScaffolding jack bases are designed to accommodate various types of terrain, including uneven or sloped surfaces.  They often feature adjustable height mechanisms, allowing workers to modify their elevation according to specific project requirements.  This adjustability ensures that the entire scaffolding system remains level and secure, which is vital for worker safety.    

RFH Jack BaseJack base is used to scaffolding or frameOverall, the proper installation and use of scaffolding jack bases contribute significantly to the overall integrity of scaffolding systems used in various construction projects. Their importance cannot be overstated when considering both efficiency in work processes and adherence to safety standards within the industry.    

Socket Screw Jack is the starting base of the scaffold. We have many kinds of scaffolding jacks, at the identical time ,we can grant oem service.    

RFH Jack Base With Wheel Size:Dia38x500mm ,wheel:8"The scaffolding jack base with wheels is an essential component in the construction and maintenance of scaffolding systems.  This device is designed to provide stability and support for various types of scaffolding structures, ensuring that they remain secure during use.  The inclusion of wheels allows for enhanced mobility, enabling workers to easily reposition the scaffolding as needed without requiring extensive manual labor or disassembly.    

RFH Swivel Jack Base With WheelThe scaffolding screw jack with wheel is a specialized component designed to facilitate the movement of scaffolding systems on construction sites. This device combines the functionality of a traditional screw jack, which provides height adjustment and stability, with the added mobility offered by wheels.